HE BEST BIG VALVE ANIMAL HEAD YOU CAN BUY
(here's why/
• This head features a stainless steel 1 - l/4" intake and 1 -1/8" exhaust valve.
• Completely CNC Ported with 4axis Mill
• Hand Blended Ports
• Epoxy Filled To Optimize Velocity
• The Only Head with CNC Combustion Chamber for Max Efficiency
• Non-Beryllium- Copper Seats (same material that NASCAR engines use) (not toxic)
• Seats have +3x the Heat Conductivity of Steel Seats to Help Pull Heat Out of Valves
• The Right 3 Angle Valve Job
• CNC Milled for Higher Compression
So Many Think Putting Big Valves In a Head and Doing Some Grinding Makes a Good Head. There is so Much More to It. If You Are Going to Invest In a Performance Head, Make it The Best!
Complete Animal Big Valve heads with valves and springs ready to bolt on and go racing.
Comes completely Assembled! PLEASE ALLOW 3 BUSINESS DAYS TO DO THE FINAL ASSEMBLY OF THE HEAD.
Roller Rockers are additional.
The valve seal is also tested with air pressure.
These heads are fully assembled and ready to bolt on your engine. The valve springs will be installed and the valve seal will be tested with air pressure1
===========
DON'T FORGET TO CHECK OUT THESE RECOMMENDED ACCESSORIES:
Faster Motors Breather Bypass Kit
0.310" lift high perf cam recommended when using 1.25 : 1 roller rockers
28mm Flat slide Carb
Air cooled (finned) aluminum intake manifold
Air filter adaptor
Air filter $
Using a cam with more that .310" lift may cause the valve springs to coil bind and is NOT RECOMMENDED
High performance chrome molly push rod kit
Upgraded valve springs for roller rockers.