Wiseco Pistons and Rings

  • Call For Pricing
  • Regular price $86.95


Every Piston includes:

• HD .490" wrist pin

• Complete Ring Kit

• Spiral locks

Wiseco recommends .0035" to .004" piston to wall clearance for all these pistons. For the Animal, LO 206, Model 15 the 305 cc or the 342 cc approximately .090" needs to be machined off the top to get the correct piston pop up. *(Faster Motors can do that for you for and additional $19.95)

AVAILABLE SIZES

2.6985" piston for a 2.702" finished bore  $86.95
This is my choice of piston to use if you are converting an Animal to a stroker motor. It will require the block to be bored or honed approximately .015".  If you are using a used block it's important to clean up (straighten) the bore anyhow.

2.7135" piston for a 2.717" finished bore  $86.95

2.7325" piston for a 2.736" finished bore  $86.95
This is the largest size Wiseco piston you can use if you need to stay below the 14.5 Cubic inch rule.

2.7525" piston for a 2.756" bore  $79.95 
Requires re-sleeving the block.

2.7685" piston for a 2.772" bore   $79.95
Requires re-sleeving the block.

2.7725" piston for a 2.776" bore  $79.95 
Requires re-sleeving the block.

2.7925" piston for a 2.796" bore  $86.95
Requires re-sleeving the block.

2.9855" piston for a 2.990" finished bore  $136.95
This piston is a good choice if you are going to build a big bore such as a Briggs Model 15. Requires re-sleeving the block.

3.0075" piston for a 3.011" finished bore  $136.95
This piston is a good choice if you are going to build a big bore such as a Briggs Model 15. Requires re-sleeving the block.